NOTES ON ASSEMBLING YOUR D12 EVO MEGAKIT:"
Organize your workspace beforehand, identify the parts carefully, and pay attention to the numbers and letters on the printer and the bags to match them correctly.

• The printer is delivered with all the tools necessary for assembly and setup. There are additional tools that are not required for assembly but may be needed in case of disassembly of certain parts. Be sure to keep them.
• At the end of the assembly, you may have some extra screws or additional elements. These are duplicate items provided in case of loss or other issues. Keep them safely.
• The nozzle may have some residue from previous filaments, and the PTFE (Teflon) tube may have small marks at each end. This is entirely normal, as many components of the machine are tested in the factory, especially the print head and extruders.
• Before putting the 3D printer into operation for the first time, remember to lower the bed by turning the knobs located underneath. This is to prevent the nozzle from potentially crashing into the bed and causing damage to the machine. In theory, this may not be necessary, but since you will need to level the bed later on, leave some room for the nozzle to move.