SD Card File / USB Flash Drive
Fichier carte SD / Clef usb
WANHAO DUPLICATOR 12/230 EVO MEGAKIT
Once the assembly and setup of your printer are complete, you can print a test file to validate the assembly of your printer.
You will find test files (in .gcode or .g) on your SD card or USB drive. If you don't have them, you can download the files below corresponding to your printer model.
If you did not purchase the 3D touch:
Contents of the 230 EVO MEGAKIT SD card
Warning: Using a 3D touch GCODE file on a non-equipped D12 will result in the firmware crashing. If you have made this mistake, you will need to re-flash your printer with the correct firmware.
Rating
0
0
There are no comments for now.
Join this Course
to be the first to leave a comment.