Adjustment
RÉGLAGE
WANHAO DUPLICATOR 12/230 EVO MEGAKIT
- We invite you to carefully watch the setup video in its entirety, starting at minute 9:25.
NOTES ON ASSEMBLING YOUR D12 EVO MEGAKIT:
Organize your workspace beforehand, identify the parts carefully, and pay attention to the numbers and letters on the printer and the bags to match them correctly.
- The printer is delivered with all the tools necessary for adjustment. There are additional tools that are not required for assembly but may be needed in case of disassembly of certain parts. Be sure to keep them.
- As mentioned in the video, the nozzle may have some residue from previous filaments, and the PTFE (Teflon) tube may have small marks at each end. This is entirely normal, as many components of the machine are tested in the factory, especially the print head and extruders.
- Before putting the 3D printer into operation for the first time,
remember to lower the bed by turning the knobs located underneath. This
is to prevent the nozzle from potentially crashing into the bed and
causing damage to the machine. In theory, this may not be necessary, but
since you will need to level the bed later on, leave some room for the
nozzle to move.
Rating
0
0
There are no comments for now.
Join this Course
to be the first to leave a comment.