Home └Duplicator 12-230 └SD Card File / USB Flash Drive

Duplicator 12-230

0 %

Achevé

Contenu du cours

SD Card File / USB Flash Drive

Prev Next
Fullscreen Share

Once the assembly and adjustments of your printer are complete, you can print a test file to validate the assembly of your printer. 

You will find test files (in .gcode or .g format) on your SD card or USB drive. If not, you can download the files corresponding to your printer model below.. 

If you haven't purchased the 3D touch:

​Contents of the SD Card for 230 MONO, DUAL, and CLASSIC Models 

If you have purchased the​ 3D touch (auto-leveling sensor) :

The contents of the SD card for D12 230 with the 3D TOUCH option 

Warning: Using a 3D touch GCODE file on a non-equipped D12 will result in crashing the firmware. If you have made this mistake, you will need to re-flash your printer with the correct firmware.

Once you have confirmed that the printer is working correctly and everything is okay, you can move on to the next step: Printing your first piece using the "Slicer.".


Rating
0 0

There are no comments for now.

Join this Course
to be the first to leave a comment.

col-sm text-center text-sm-end o_not_editable { display: none !important; }