Home └FlSun V400 └Assembly and Calibration

FlSun V400

0 %

Achevé

Contenu du cours

Assembly and Calibration

Prev Next
Fullscreen Share

ASSEMBLY AND SETUP.

FLSUN V400

VIDEO FOR ASSEMBLY AND SETUP OF THE 3D PRINTER.


  • We invite you to watch the assembly and setup video in its entirety, even if it's not your first 3D printer.


 
 
  • The printer has many cables and connectors. Most of them are inside the chassis and not visible. However, some of them are loose, especially those going to the print head and on the gantry. Be careful to route them correctly during assembly to avoid snagging when the moving parts of the printer are in motion.


  • The printer comes with all the tools necessary for assembly and setup. There are additional tools that are not required for assembly but may be needed if certain parts need to be disassembled. Please remember to keep them.
  • At the end of assembly, there may be some extra screws or additional components left. These are duplicate items provided in case of loss or other issues. Please keep them safely.
  • As indicated in the video, the nozzle may have remnants of filament, and the Teflon (PTFE) tube may have small marks at each end. This is entirely normal, as many components of the machine are factory tested, especially the print head and the extruders.
Rating
1 0

There are no comments for now.

Join this Course
to be the first to leave a comment.

col-sm text-center text-sm-end o_not_editable { display: none !important; }