SD Card File / USB Flash Drive

Once the assembly and setup of your printer are complete, you can proceed with your first print.

You will find test files (in .gcode or .g) on your SD card or USB drive. If you don't have them, please download them below according to your printer.

Once you have confirmed that the printer is working correctly and everything is okay, you can move on to the next step: printing your first part using the slicer.

Content of the USB for the 300 MONO/DUAL

Content of the USB for the 300 ProMax

​If you have purchased the option 3D touch (auto-leveling sensor) additional:

Content of the USB for D12 300 with 3D TOUCH option 

Contents of the USB for 300 ProMax with 3D TOUCH option. 

Never use 3D touch GCODE files on a D12 that is not equipped, as it may cause the firmware to crash.
If you have made this mistake, you will need to re-flash your printer with a compatible firmware.